800-220-3749
Contact Us
Search
Connect with us for quotes, samples, or consultations.
- Design
- Fire
- Security
- X-Ray
- Resources
- Design
- Fire
- Security
- X-Ray
- Resources
Technical Data
Sizing Data | |
|---|---|
Typical Glass Size | |
Maximum Width | 54” (1370 mm) |
Maximum Height | 120” (3050 mm) |
Larger Custom Sizes Available | |
Thickness (Glass) | |
Minimum Thickness | 7/16” (11 mm) |
Maximum Thickness | Unlimited |
Performance Data | |
|---|---|
VLT (Visible Light Transmission) – Typical | |
CLEAR |
Dependent on type & thickness of glass/substrates used.
|
OBSCURE |
Dependent on type & thickness of glass/substrates used
|
Operating Temperature | |
0° – 35°C | INTERIOR ONLY |
Switchable Controller Energy Data (EVP-040 W-CSF / -250 W-DSF) | |
|---|---|
Purpose of Control | Operating Control / Isolated Output |
Construct of Control | Type 1 Action, Pollution Degree 2 |
Impulse Voltage | 2500 V
|
Input Power | 120 VAC, 60 Hz, 40 watt / 250 watt |
Output Power | 48 VAC / 60 Hz (nominal) |
Energy Consumption |
|
Capacity Load | Project Specific |
For use with ElectraViewTM Only | 35°C Interior Application, Class I circuits/wiring |
Power Quality | Film is protected by an isolation transformer, reducing spikes, harmonics, and noise when using ElectraView™ PDLC controller by McGrory. |
Use Copper or Aluminum Conductors | |
NOTE: MUST BE INSTALLED BY A CERTIFIED, LICENSED ELECTRICIAN FOLLOWING ALL REQUIRED BUILDING CODES Consult with McGrory for control interface options. A range of switching solutions is available, from a basic wall switch to systems fully integrated with your building automation platform.
| |
PDLC (Polymer Dispersed Liquid Crystal) FILM OVERVIEW | |
|---|---|
 | METHOD OF ACTION: FUNCTION:
|
Listings & test references
UL
ASTM
Product Certification
- ASTM C 1172 Standard Specification for Laminated Architectural Safety Glass
- Category I and II requirements of the Consumer Product Safety Commission (CPSC) Federal Standard 16 CFR-1201
- Model building code safety standards for human impact performance as found in section 2703 of SBCCI Standard Building Code, and section 5406, Standard 54-2, of ICBO Uniform Building Code
ElectraView ZeroTM Resources
Featured Resources
Specifications
Section 08 88 36.16: McGrory ElectraView OneZeroTM Switchable Privacy Glass 3-Part Specifications
DownloadAttributes
-
Switchable Privacy Glass -
Clear with Power OFF -
Energy-Efficient -
X-Ray-Shielding Options -
LEED -
HIPAA-Complaint -
Design/Decorative Options -
Fire-Rated Systems Available -
UL-Listed -
Security/Ballistic Options
Why ElectraView ZeroTM
New York-Presbyterian Hospital, NY
Corporate Interior
Clear with Power Off
Designed for spaces that require a clear state as the default, maintaining visibility in the event of power failure.
Obscure with Power On
Transitions from transparency to full privacy with the flip of a switch, maintaining natural light and clear lines of sight
Zero energy in clear state
Designed to consume no power when transparent, reducing energy use in applications where clarity is used most often while maintaining on-demand privacy.
HIPAA-Compliant
Supports medical privacy in accordance with Federal HIPAA Privacy Rule standard
UL-Listed
UL E520711 certified for compliance with applicable safety and performance standards.
Combine with McGrory’s other products
Use in conjunction with X-ray radiation-shielding glass, decorative print, or forced-entry and fire-rated systems.
Clear when Powered OFF
Designed for Openness. Engineered for Privacy.
ElectraView ZeroTM is designed for openness first. Clear in its default state, the glass preserves light and connection, then transitions to privacy at the flip of a switch.
We’re the ONLY MANUFACTURER offering a truly clear state when power is OFF so you can take full advantage of daylighting all day long.
Obscure with power off
Clear with power on
Healthcare
- Patient rooms, ICU, ER bays (privacy maintained even during power outages.)
- Exam rooms, procedure rooms (HIPAA compliance and patient dignity with no energy needed.)
Corporate
Executive offices or conference rooms (default privacy when powered off.)
Education
Counseling rooms, nurse’s offices (ensures privacy first.)
Security-sensitive spaces
Government, labs, or data centers (privacy protects sensitive work as a baseline.)
Designed for spaces that require an obscured state as the default, ensuring privacy even during power loss.
Clear with power off
Obscure with power on
Healthcare
- Nurse stations (staff can monitor patients without needing to “activate” visibility.)
- Operating rooms with observation windows (clear ensures visibility first, then privacy as needed.)
Corporate
Open office fronts (promotes transparency, collaboration, and daylighting by default.)
Education
Classrooms, labs, collaboration spaces (default clear supports supervision, safety, and openness.)
Hospitality
Hotel lobbies, restaurants, and (lounges open feel is the default, privacy only when required.)
We’re the ONLY MANUFACTURER offering a truly clear state when power is OFF — so you can take full advantage of daylighting all day long.
Integrate ElectraViewTM with our other glass and glazing systems
Explore additional decorative, privacy, and life-safety glass solutions by McGrory